PAGES

Friday, March 1, 2019

Crochet Along - Famous Dino CAL : Part I

My Daughter's Birthday is upcoming.. and while I do not sell trademark/familiar characters, I still make them occasionally.  And it would be a shame to let this design go to waste...
So, what's a Mom to do? 

Do a CAL (Crochet A Long) and let you share in the project as well.
I hope you enjoy!

This CAL is a little different in that you know which character you are making before hand - so it's not a surprise, only a project that is done together!



Skill Level: Easy / Advanced Beginner
Measurements: 14.5 inches tall (approx.) 
Gauge :  Not critical for this project
Yardage :  Main Color: less than 7oz/364yds, Accent Colors: less than 4oz/202yds

General Notes:
- This pattern is worked in continuous spiral rounds unless otherwise noted.
- This pattern utilizes standard US Crochet Terms.
- Any changes in materials to this pattern, (hook size/yarn weight) will not produce the approximate size listed.



Materials Used in Model
Red Heart® WW 4-Ply Yarn in 0672 Spring Green, 0321 Gold, 0320 Cornmeal, 0319 Cherry Red, 0311 White and 0312 Black 
Size G/6-4.00mm Crochet Hook (US)
Filling for Plushies (fiberfil or similar) 
Crochet Needle for sewing
Long Straight Pins for positioning


Head (Make 1) : 
with Spring Green,
Chain 6, 
___ Rnd 1: sc in 2nd ch from hook, sc in ea of nxt 3 chs, 3 sc in end ch st - turn piece to allow you to work up the other side of original beg chain (as if a flat round),  sc in ea of nxt 3 sts, Inc in last st  (12 sts)
___ Rnd 2: [sc in nxt st, Inc in nxt st] 6 times  (18 sts)

___ Rnd 3: [sc in ea of nxt 2 sts, Inc in nxt st] 6 times  (24 sts)
___ Rnd 4: [sc in ea of nxt 3 sts, Inc in nxt st] 6 times  (30 sts)
___ Rnd 5: sc in nxt st, (Inc in nxt st, sc in ea of nxt 2 sts) 4 times, Inc in nxt st, sc in ea of nxt 8 sts, Inc in nxt st, sc in ea of nxt 7 sts  (36 sts)
___ Rnd 6: sc in ea st around  (36 sts)
___ Rnd 7: (Inc in nxt st, sc in ea of nxt 2 sts) twice, Inc in nxt st, sc in ea of nxt 5 sts, (Inc in nxt st, sc in ea of nxt 2 sts) twice, Inc in nxt st, sc in ea of nxt  17 sts  (42 sts)
___ Rnds 8-10: sc in ea st around  (42 sts/ea rnd)
___ Rnd 11: sc in ea of nxt 2 sts, Dec nxt 2 sts tog, sc in ea of nxt 2 sts, Dec nxt 2 sts tog, sc in ea of nxt 9 sts, Dec nxt 2 sts tog, sc in ea of nxt 2 sts, Dec nxt 2 sts tog, sc in ea of nxt 19 sts  (38 sts)
___ Rnd 12: sc in nxt st, Dec nxt 2 sts tog, sc in ea of nxt 2 sts, Dec nxt 2 sts tog, sc in ea of nxt 7 sts, Dec nxt 2 sts tog, sc in ea of nxt 2 sts, Dec nxt 2 sts tog, sc in ea of nxt 18 sts  (34 sts)
___ Rnd 13: sc in nxt st, Dec nxt 2 sts tog, sc in ea of nxt 2 sts, Dec nxt 2 sts tog, sc in ea of nxt 5 sts, Dec nxt 2 sts tog, sc in ea of nxt 2 sts, Dec nxt 2 sts tog, sc in ea of nxt 16 sts  (30 sts)
___ Rnds 14-15: sc in ea st around  (30 sts/ea rnd)
___ Rnd 16: (Dec nxt 2 sts tog, sc in nxt st) 5 times, Dec nxt 2 sts tog, sc in ea of nxt 13 sts  (24 sts)
___ Rnd 17: sc in ea st around  (24 sts)
___ Rnd 18: (sc in ea of nxt 3 sts, 3 sc in nxt st) twice, sc in ea of nxt 16 sts  (28 sts)
___ Rnd 19: (sc in ea of nxt 2 sts, Inc in nxt st) twice, sc in ea of nxt 3 sts, Inc in nxt st, sc in ea of nxt 2 sts, Inc in nxt st, sc in ea of nxt 15 sts  (32 sts)
___ Rnd 20: sc in nxt st, (Inc in nxt st, sc in ea of nxt 2 sts) twice, Inc in nxt st, sc in ea of nxt 5 sts, (Inc in nxt st, sc in ea of nxt 2 sts) 3 times, Inc in nxt st, sc in ea of nxt 7 sts, Inc in nxt st, sc in nxt st  (40 sts)
___ Rnd 21: [sc in ea of nxt 9 sts, Inc in nxt st] 4 times  (44 sts)
___ Rnd 22: [sc in ea of nxt 10 sts, Inc in nxt st] 4 times  (48 sts)
___ Rnds 23-28: sc in ea st around  (48 sts/ea rnd)
___ Rnd 29: [sc in ea of nxt 6 sts, Dec nxt 2 sts tog] 6 times  (42 sts)
___ Rnd 30: sc in ea st around  (42 sts)
___ Rnd 31: [sc in ea of nxt 5 sts, Dec nxt 2 sts tog] 6 times  (36 sts)
___ Rnd 32: [sc in ea of nxt 4 sts, Dec nxt 2 sts tog] 6 times  (30 sts)
___ Rnd 33: [sc in ea of nxt 3 sts, Dec nxt 2 sts tog] 6 times  (24 sts)
___ Rnd 34: [sc in ea of nxt 2 sts, Dec nxt 2 sts tog] 6 times  (18 sts)
___ Rnd 35: [sc in nxt st, Dec nxt 2 sts tog] 6 times  (12 sts)
___ Rnd 36: [Dec nxt 2 sts tog] 6 times  (6 sts)
Finish off, leaving sufficient tail remaining to weave through the front loops of Rnd 36 to close opening so that no stuffing can escape.



Eyeball (Make 1) : 
with White,
Chain 9, 
___ Rnd 1: sc in 2nd ch from hook, sc in ea of nxt 6 chs, 3 sc in end ch st - turn piece to allow you to work up the other side of original beg chain (as if a flat round),  sc in ea of nxt 6 sts, Inc in last st  (18 sts)
___ Rnd 2: [sc in nxt st, Inc in nxt st] 9 times  (27 sts)
___ Rnd 3: [sc in ea of nxt 2 sts, Inc in nxt st] 9 times  (36 sts)
___ Rnds 4-6: sc in ea st around  (36 sts/ea rnd)
Finish off, leaving sufficient tail to secure Eyeball to Head.  Model's Eyeball is secured between approximately Rnds 19 through 24, centered on top of Head.




Eyelid (Make 1) : 
with Spring Green,
Chain 9, 
___ Rnd 1: sc in 2nd ch from hook, sc in ea of nxt 6 chs, 3 sc in end ch st - turn piece to allow you to work up the other side of original beg chain (as if a flat round),  sc in ea of nxt 6 sts, Inc in last st  (18 sts)
___ Rnd 2: [sc in nxt st, Inc in nxt st] 9 times  (27 sts)
___ Rnd 3: [sc in ea of nxt 2 sts, Inc in nxt st] 9 times  (36 sts)
___ Rnd 4: [sc in ea of nxt 5 sts, Inc in nxt st] 6 times  (42 sts)
___ Rnds 5-8: sc in ea st around  (42 sts/ea rnd)
___ Rnd 9/ROW:  Squeeze front and back pieces flat together - working through both thicknesses (4 lps total) hdc in ea of nxt 6 sts, sc in ea of nxt 9 sts, hdc in ea of nxt 6 sts, closing the opening for a count of 21 sts. (If you lose a stitch and only can make 20 sts across, this is fine also - just make sure that the opening is stitched closed.)
Finish off, leaving sufficient tail remaining to secure Eyelid to Head around Eyeball.


Pause - with a separate piece of Spring Green (for Eyelid) and Black (for  Eyeball); break the single tube in half; to give the appearance of 2 separate eyes and eyelids.  This can be accomplished easily with either a "whip stitch" or a "long stitch".

Once you have completed this part of the Head, continue on with the remaining sections, including the "Pupils".





Pupil (Make 2) : 
with Black,
___ Rnd 1: Using either the [ch 2, begin work in 2nd st from hook] or [magic circle] method to begin project, 6 sc in st (6 sts)
___ Rnd 2: 4 sc in nxt st, remaining sts unworked.  (9 sts)
Finish off, leaving sufficient tail remaining to secure Pupil to each eye.




Mouth (Make 1) : 
with White,
___ Rnd 1: Using either the [ch 2, begin work in 2nd st from hook] or [magic circle] method to begin project, 9 sc in st (9 sts)
___ Rnd 2: [Inc in nxt st] 9 times  (18 sts)
___ Rnd 3: [sc in ea of nxt 2 sts, Inc in nxt st] 6 times  (24 sts)
___ Rnd 4: [sc in ea of nxt 3 sts, Inc in nxt st] 6 times  (30 sts)
___ Rnd 5: sc in ea st around  (30 sts)
___ Rnd 6: [sc in ea of nxt 4 sts, Inc in nxt st] 6 times  (36 sts)
___ Rnds 7-8: sc in ea st around  (36 sts/ea rnd)
___ Rnd 9/ROW:  Squeeze front and back pieces flat together - working through both thicknesses (4 lps total) hdc in ea of nxt 4 sts, sc in ea of nxt 10 sts, hdc in ea of nxt 4 sts, closing the opening for a count of 18 sts. (If you lose a stitch and only can make 17 sts across, this is fine also - just make sure that the opening is stitched closed.)
Finish off, leaving sufficient tail remaining to secure Mouth to Head just under the muzzle area.




Cheek (Make 2) : 
with White,
___ Rnd 1: Using either the [ch 2, begin work in 2nd st from hook] or [magic circle] method to begin project, 6 sc in st (6 sts)
___ Rnd 2: [Inc in nxt st] 6 times  (12 sts)
___ Rnd 3: [sc in nxt st, Inc in nxt st] 6 times  (18 sts)
___ Rnd 4: [sc in ea of nxt 2 sts, Inc in nxt st] 6 times  (24 sts)
___ Rnd 5: [sc in ea of nxt 7 sts, Inc in nxt st] 3 times  (27 sts)
___ Rnd 6: sc in ea of nxt 12 sts, remaining sts unworked  (27 sts)
Finish off, leaving sufficient tail remaining to secure Cheek to side of Head where mouth joins the Head.





Part II Released : 05 March 2019
Part III Released : 10 March 2019
Part IV Released : 15 March 2019
Page Updated on: 23 October 2020


✦⋆✦⋆✦⋆✦⋆✦⋆✦⋆✦⋆✦⋆✦⋆✦⋆✦⋆✦⋆✦⋆✦⋆✦⋆✦⋆✦⋆✦⋆✦⋆✦⋆✦⋆✦⋆✦

(¯`·._(_.·´¯`·._.»  Copyright Notice  «._.·´¯`·._)_.·´¯)

Should you wish to share this Information or FiberDoodlesbyK4TT Patterns, please share using an Official FiberDoodlesbyK4TT authorized page 
.
✦⋆✦  RAVERLY  ✦⋆✦  BLOG  ✦⋆✦  ETSY  ✦⋆✦

Permission has NOT be granted to any 3rd Party to re-print, re-post or translate any FiberDoodlesbyK4TT products.

By utilizing any product from FiberDoodlesbyK4TT, whether by clicking over the internet, telephone, facsimile or otherwise, you agree to the Terms and Conditions of the FiberDoodlesbyK4TT End User Licensing Agreement (EULA) or qualification.
All patterns are sold in good faith. Every effort has been made to ensure that all instructions are accurate and complete. FiberDoodlesbyK4TT cannot, however, be responsible for human error or variations in individual work.


All patterns released from FiberDoodlesbyK4TT are protected under Federal copyright laws. Reproduction/distribution, in part or in whole, is strictly prohibited unless specifically authorized. This includes, but is not limited to, any form of reproduction or distribution on or through the Internet, including posting, scanning, "Crochet-A-Longs" and/or eMail transmission.